This is a step-by-step guide that will help you through the process of hanging up your rod curtains. Once you have purchased your brand-new curtains you’ll want make sure they are put up perfectly. This will prevent them from getting damaged further along the line. If you’re still looking for some good quality curtains, use Snupit to locate multiple curtain retailers. Hanging up your curtains using a rod is one of the easiest ways to do it. Here is everything you need to know about hanging up your curtains. Once that’s been done you’ll have beautiful curtains hanging up in your home.
Step 1: Make your measurements
Before even attempting to hang your curtains, you’ll want to make sure that they are the right size for your space. It’s a good idea to grab a tape measurer and measure from about 20cm above your window to the floor. Then, proceed to measure the width of your window frame and allow about 15cm leeway on each side. Ultimately, make sure that your curtain meets these dimensions.
Step 2: Get hold of equipment and materials
There are a few necessities that are required to hang up curtains on a bracket. Obviously, you will require two brackets. In addition to this you will need:
• A curtain rod (accompanied by the two brackets)
• A tape measurer to ensure lengths and widths are accurate
• A Level to make sure your rod sits parallel to the width of the window
• A screwdriver/ Drill to place the screws and install them tightly
• A pencil to mark the points in which you will screw
Step 3: Install the brackets
Utilise a drill and screwdriver to install your brackets. Before screwing the brackets in, be sure that they are evenly placed. Better yet, make sure they are not placed further apart than the length of the rod. This is essential as your curtains will not stay put if you ignore this step. However, you should make sure that the brackets are far enough for the whole window to be exposed when the curtains are opened.
Step 4: Place the rod in the curtain
Curtains that are designed to be used with a rod will have an opening at the top. This opening is there for the curtain rod. Simply push the curtain rod through the opening and your curtains will be able to hang from the rod. Make sure that the rod isn’t too thick for your curtains. Otherwise, it will be difficult to open and close your curtains.
Step 5: Hang the curtain
This is the easiest and most satisfying step. Simply place your rod inbetween the brackets. If your brackets are installed properly your curtains should hang beautifully over your window. Once this is done, you can grab a cup of coffee and enjoy your newly installed curtains.